Titanium Bolts, Screws, Studs and U-Bolts Purchasing Matrix
Titanium fasteners must be ordered by function, material, finished-fastener standard or drawing, thread, dimensions, surface, mating parts and acceptance tests. Bar-stock chemistry alone does not prove finished-fastener performance.
Selection Matrix
| Option | Purchasing consideration |
|---|---|
| Clamping | Machine screws, socket-head screws and carriage bolts require head, drive, thread, length and bearing definition. |
| Location or motion | Shoulder bolts and set screws require controlled shoulder, tip, fit and surface geometry. |
| Attachment | Eye bolts and U-bolts require load direction, bend, leg, thread and application limits. |
| Long engagement | Studs and threaded rods require thread at each end, unthreaded length, straightness and installation method. |
Products Covered
- Titanium Carriage Bolts
- Titanium Eye Bolts
- Titanium Machine Screws
- Titanium Set Screws
- Titanium Shoulder Bolts
- Titanium Socket Head Cap Screws
- Titanium Studs and Threaded Rods
- Titanium U-Bolts
RFQ and Inspection
Define grade and condition, thread tolerance and gauging, head or body geometry, mating materials, lubricant/coating, service temperature, installation, proof or tensile tests and MTC.
Avoid These Purchasing Errors
- Do not use grade alone as the complete product specification.
- Do not copy dimensions from a different product form or standard without review.
- Do not assume a surface appearance proves manufacturing route or certification.
- Do not omit service, mating-component, fabrication or inspection requirements.
Request a Product Review
Send grade, product form, standard or drawing, dimensions, quantity, application, tests and destination. SAKY ALLOY can review the inquiry against the relevant product pages above.
FAQ
Can a quotation be prepared from grade and quantity only?
Only a rough discussion may be possible. A reliable quotation requires product form, dimensions, standard or drawing, condition, tests and documentation.
Should every optional test be requested?
No. Select tests that address the governing specification, service risk and project quality plan. Unnecessary testing can increase cost and lead time without improving suitability.