Grade 1 vs Grade 9 vs Grade 12 Titanium Sheet and Plate
Grade 1, Grade 9 and Grade 12 titanium flat products are selected for different forming, strength and corrosion requirements. Buyers must also define thickness, condition, surface, flatness, tolerance and fabrication route.
Selection Matrix
| Option | Purchasing consideration |
|---|---|
| Grade 1 | Commercially pure titanium emphasizing ductility and formability. |
| Grade 9 | Ti-3Al-2.5V alloy balancing strength and formability for selected sheet applications. |
| Grade 12 | Ti-Ni-Mo alloy for service-specific corrosion and mechanical requirements. |
Products Covered
- Grade 1 Titanium Sheet Plate
- Grade 9 Titanium Sheet
- Grade 12 Titanium Sheet Plate
- Cut-to-Size Titanium Plate Blanks
- ASTM B265 Titanium Plate
RFQ and Inspection
Provide grade, specification, thickness, width, length, rolling direction if needed, condition, surface, flatness, edges, cut allowance, inspection and MTC.
Avoid These Purchasing Errors
- Do not use grade alone as the complete product specification.
- Do not copy dimensions from a different product form or standard without review.
- Do not assume a surface appearance proves manufacturing route or certification.
- Do not omit service, mating-component, fabrication or inspection requirements.
Request a Product Review
Send grade, product form, standard or drawing, dimensions, quantity, application, tests and destination. SAKY ALLOY can review the inquiry against the relevant product pages above.
FAQ
Can a quotation be prepared from grade and quantity only?
Only a rough discussion may be possible. A reliable quotation requires product form, dimensions, standard or drawing, condition, tests and documentation.
Should every optional test be requested?
No. Select tests that address the governing specification, service risk and project quality plan. Unnecessary testing can increase cost and lead time without improving suitability.