Grade 1 vs Grade 5 vs Grade 12 Titanium Pipe and Tube
Grade 1, Grade 5 and Grade 12 titanium tubing serve different material and fabrication requirements. Selection must consider the governing pipe or tube specification, service chemistry, strength, forming, welding and finished equipment design.
Selection Matrix
| Option | Purchasing consideration |
|---|---|
| Grade 1 | Commercially pure titanium with high ductility and lower strength among common CP grades. |
| Grade 5 | Ti-6Al-4V high-strength alloy requiring fabrication and service review. |
| Grade 12 | Ti-Ni-Mo alloy for selected corrosion and mechanical requirements. |
Products Covered
- Grade 1 Titanium Pipe & Tube
- Grade 5 Titanium Pipe & Tube
- Grade 12 Titanium Pipe & Tube
- Titanium Capillary Tube
- ASTM B861 Seamless Pipe
RFQ and Inspection
State pipe or heat-exchanger tube scope, seamless or welded route, OD/NPS, wall/schedule, length, condition, ends, tolerances, tests and documents.
Avoid These Purchasing Errors
- Do not use grade alone as the complete product specification.
- Do not copy dimensions from a different product form or standard without review.
- Do not assume a surface appearance proves manufacturing route or certification.
- Do not omit service, mating-component, fabrication or inspection requirements.
Request a Product Review
Send grade, product form, standard or drawing, dimensions, quantity, application, tests and destination. SAKY ALLOY can review the inquiry against the relevant product pages above.
FAQ
Can a quotation be prepared from grade and quantity only?
Only a rough discussion may be possible. A reliable quotation requires product form, dimensions, standard or drawing, condition, tests and documentation.
Should every optional test be requested?
No. Select tests that address the governing specification, service risk and project quality plan. Unnecessary testing can increase cost and lead time without improving suitability.