Titanium Coil Purchasing Matrix: Grades, Thickness, Width and Processing
Titanium coil orders require more than grade and gauge. The supplier needs thickness, width, coil ID and OD, unit weight, edge, surface, tolerance and downstream processing information.
Selection Matrix
| Option | Purchasing consideration |
|---|---|
| Grade 1 and Grade 3 | Commercially pure grades selected according to required formability, strength and corrosion service. |
| Grade 5 and Grade 9 | Alloy grades requiring condition, formability and property review for the intended operation. |
| Grade 7 | Palladium-alloyed commercially pure titanium for corrosion-selected service after chemistry review. |
Products Covered
- Grade 1 Titanium Coil
- Grade 3 Titanium Coil
- Grade 5 Titanium Coil
- Grade 7 Titanium Coil
- Grade 9 Titanium Coil
- Titanium Coil
- Precision Titanium Strip
RFQ and Inspection
State slit or mill width, critical side, camber, flatness, coil set, allowable welds, core, packing orientation and processing-line limits.
Avoid These Purchasing Errors
- Do not use grade alone as the complete product specification.
- Do not copy dimensions from a different product form or standard without review.
- Do not assume a surface appearance proves manufacturing route or certification.
- Do not omit service, mating-component, fabrication or inspection requirements.
Request a Product Review
Send grade, product form, standard or drawing, dimensions, quantity, application, tests and destination. SAKY ALLOY can review the inquiry against the relevant product pages above.
FAQ
Can a quotation be prepared from grade and quantity only?
Only a rough discussion may be possible. A reliable quotation requires product form, dimensions, standard or drawing, condition, tests and documentation.
Should every optional test be requested?
No. Select tests that address the governing specification, service risk and project quality plan. Unnecessary testing can increase cost and lead time without improving suitability.