Titanium Pipe & Tube for Bulk Procurement
Select titanium pipe or tubing by service, manufacturing route and inspection requirements—not by grade alone. We supply commercially pure and alloy titanium tubing in seamless and welded forms for heat exchangers, condensers, process piping, hydraulic systems and fabricated equipment.
| Product requirement | Common reference | What to include in an RFQ |
|---|---|---|
| Heat-exchanger or condenser tube | ASTM B338 / ASME SB-338 | Grade, seamless or welded, OD, wall, length, finish, testing and tube-end condition |
| Seamless process pipe | ASTM B861 / ASME SB-861 | Grade, NPS or OD, schedule or minimum wall, length, ends and inspection |
| Welded process pipe | ASTM B862 / ASME SB-862 | Grade, dimensions, weld route, examination, ends and applicable piping code |
| Small-bore precision tubing | Drawing or project specification | OD, ID or wall, tolerances, straightness, surface, cleanliness and quantity |
Common titanium grades
- Grade 1 for high formability
- Grade 2 for general corrosion-resistant service
- Grade 5 (Ti-6Al-4V) for higher strength
- Grade 9 (Ti-3Al-2.5V) for strength with tube formability
- Grade 12 for selected elevated-temperature and corrosion duties
Fast quotation checklist
- Grade and governing standard with revision
- Seamless or welded construction
- OD or NPS, wall or schedule, and length
- Quantity or total weight and destination
- Tolerances, surface, ends and fabrication needs
- Tests, inspection documents and packaging
A material standard does not replace the project design code. Any grade, wall or standard substitution should be reviewed by the responsible engineer.
Request a Titanium Pipe & Tube QuoteCompare ASTM B338, B861 and B862
Frequently Asked Questions
What is the MOQ for titanium pipe or tube?
MOQ depends on grade, dimensions, manufacturing route and mill availability. Send the required size and total quantity so the practical order quantity and price basis can be checked.
What information is needed for a titanium tube price?
Provide grade, standard, seamless or welded construction, OD, wall, length, quantity, tolerances, tests, documents, packaging and destination.
Can a lower-cost titanium grade replace the specified grade?
Possible alternatives depend on strength, corrosion, temperature, fabrication and code requirements. Any substitution must be approved by the responsible engineer or end user.
Product and Buying Information
SAKY ALLOY supplies titanium tube, tubing and pipe for heat exchangers, chemical processing, marine systems and other corrosion-resistant applications.
- Titanium tube, tubing and pipe
- Multiple diameters and wall thicknesses
- Grade and specification selection support
- Material certificates and inspection documents
Related titanium products
Technical sourcing guide
Titanium Pipe, Tube & Tubing: specifications, grades and supply options
Use the information below to prepare a clear RFQ. Final availability depends on grade, size, quantity, specification revision and required documentation.
ASTM B338, ASTM B861 and ASTM B862 with corresponding ASME specifications selected by seamless, welded or heat-exchanger service.
Commercially pure and alloy grades including 2, 5, 7, 9, 12 and 23, subject to product form and service conditions.
Round seamless or welded tube and pipe are specified by outside diameter or NPS, wall thickness or schedule, length, end finish and tolerance. Square or rectangular titanium tubing requires the outside width and height, corner radius, wall, straightness, length and an agreed seamless, welded or fabricated route; availability is reviewed against the RFQ.
Hydrostatic or pneumatic, eddy-current, ultrasonic, dimensional and surface tests are available as required by the order standard.
Typical applications
- Heat exchangers, condensers and power systems
- Chemical processing and pressure equipment
- Seawater, offshore and desalination systems
- Aerospace, medical and high-performance tubing
Priority product pages
How to specify titanium pipe, tube & tubing for quotation
Provide these purchasing details so material availability, manufacturing route, inspection scope and delivery can be reviewed without avoidable follow-up.
- Product form and titanium grade
- Governing standard and revision
- Dimensions, tolerances and quantity
- Surface, edge, end or machining requirements
- Application and service environment
- Inspection, certificate, packaging and destination requirements
Technical selection guides
Bulk Order, MOQ and Quotation Guidance
MOQ is reviewed against the grade, specification, manufacturing route, dimensions and total order weight. Standard sizes and consolidated quantities usually provide a more practical purchasing route than multiple small, drawing-specific lots.
| RFQ information | Why it affects supply and price |
|---|---|
| Grade and governing standard | Defines chemistry, condition, tests and eligible production routes |
| Seamless, welded or heat-exchanger tube | Changes manufacturing, inspection and the applicable ASTM specification |
| OD, wall thickness and length | Determines size availability, tolerances, yield and cutting requirements |
| Quantity or total weight | Allows MOQ, lot split and bulk pricing to be reviewed accurately |
| Tests and documentation | Hydrostatic, eddy-current, UT, MTC and traceability affect scope and lead time |
| Destination and packing | Supports export packing, bundle length and freight planning |
Need a Lower-Cost Supply Option?
Send the required service conditions and any permitted alternatives. Cost may sometimes be reduced by using standard mill lengths, consolidating sizes, adjusting non-critical tolerances or selecting a different production route. Seamless versus welded construction, or any material-grade substitution, must remain compliant with the governing specification and receive written engineering approval where the design is affected.
Review Grade 2 seamless titanium tube, Grade 2 welded titanium tube and titanium heat-exchanger tube, or send the complete RFQ for a route comparison.
Frequently asked sourcing questions
Which standard and grade should I specify?
ASTM B338, ASTM B861 and ASTM B862 with corresponding ASME specifications selected by seamless, welded or heat-exchanger service. The final grade, revision and supplementary requirements should be stated on the RFQ or purchase order.
Can size and tolerance be customized?
Round seamless or welded tube and pipe are specified by outside diameter or NPS, wall thickness or schedule, length, end finish and tolerance. Square or rectangular titanium tubing requires the outside width and height, corner radius, wall, straightness, length and an agreed seamless, welded or fabricated route; availability is reviewed against the RFQ. Final dimensional tolerances are confirmed against the governing standard or customer drawing.
What inspection and documentation are available?
Hydrostatic or pneumatic, eddy-current, ultrasonic, dimensional and surface tests are available as required by the order standard.. Supply condition: Production route, surface finish, packaging and delivery documents are confirmed at quotation.
Send the standard, grade, dimensions, quantity, application and certificate requirements.