Hot Rolled Titanium Plate
Hot rolled titanium plate supplied by grade, thickness, width, length, condition, flatness, surface, machining allowance, inspection and traceability.
- Material
- Titanium Grade 1, Grade 2, Grade 5, Grade 7, Grade 12 or specified alloy
- Standard
- ASTM B265 / ASME SB265 or expressly invoked project specification
- Product Form
- Sheet, plate and cut blanks; thickness, width, length, flatness and edge condition are confirmed by RFQ
- Documents
- MTC, inspection and heat/lot traceability
Product Detail
Product Introduction
Hot Rolled Titanium Plate is supplied for corrosion-resistant fabrication and precision manufacturing. The final purchase definition must identify the exact material designation, governing specification and revision, dimensions, condition, tolerances, tests and documentation; trade-name or cross-standard equivalence is not assumed.
Product Specifications
| Product | Hot Rolled Titanium Plate | Grade | Titanium Grade 1, Grade 2, Grade 5, Grade 7, Grade 12 or specified alloy |
|---|---|---|---|
| Standard | ASTM B265 / ASME SB265 or expressly invoked project specification | Size & Form | Plate and cut blanks; thickness, width, length, flatness, edge condition and machining allowance by RFQ |
| Tolerance | Governing material standard or approved customer drawing | Supply Condition | Hot rolled, annealed and descaled or pickled; blasted, ground or machined surface by agreement |
| Inspection | MTC review, dimensional and surface inspection, heat/lot traceability, with PMI or applicable NDT when specified | Documents | MTC, heat/lot traceability and agreed inspection reports |
Send the complete material RFQ
Include grade, specification revision, dimensions, tolerance, quantity, condition, tests and destination.
Chemical Composition
Weight percent; maximum unless a range is shown. Titanium is the balance. The ordered specification and grade control.
| Grade / UNS | Principal Alloying Elements | Fe max | O max | C max | N max | H max | Ti |
|---|---|---|---|---|---|---|---|
| Grade 5 / R56400 | Al 5.50–6.75; V 3.50–4.50 | 0.40 | 0.20 | 0.08 | 0.05 | 0.015 | Balance |
Mechanical Properties – Annealed Material Reference
| Grade | Ultimate Tensile Strength min | 0.2% Yield Strength min | Elongation min |
|---|---|---|---|
| Grade 5 | 895 MPa | 828 MPa | 10% |
Representative minima only. Product form, section size, heat treatment and the invoked specification determine the certified acceptance values.
Typical Physical Properties
| Grade | Density | Elastic Modulus | Thermal Expansion |
|---|---|---|---|
| Grade 5 | 4.43 g/cm³ | Approx. 114 GPa | Approx. 8.6 µm/m·K |
Typical engineering references, not inspection acceptance limits.
Certificates & Inspection Records
Services We Can Provide
Product Packaging
Sheet and plate surfaces are interleaved or wrapped as required, protected at edges and secured on pallets or in export cases with grade, heat and dimensional identification. Typical export packaging for the same physical product form is shown below; final packing is confirmed for each order.
Application Scenarios
Chemical processing equipment
Material grade, dimensions, condition and inspection must be matched to the application requirements.
Marine and desalination systems
Material grade, dimensions, condition and inspection must be matched to the application requirements.
Industrial fabrication and precision components
Material grade, dimensions, condition and inspection must be matched to the application requirements.
Specification & Selection Notes
Product-standard boundary
Hot rolled is a manufacturing-route or supply descriptor; it is not a titanium grade or a complete material standard. ASTM B265/B265M covers annealed titanium and titanium-alloy strip, sheet and plate. The order should define the exact revision, grade and UNS, plate form, final condition, thickness, width, length and tolerances, flatness, surface, edge condition and machining allowance. Do not describe material as both merely as-rolled and ASTM B265 annealed without resolving the required final condition.
Inspection and traceability
Confirm grade and heat identity, final condition, chemistry and tensile results, thickness, width, length, flatness, surface and edges, marking, MTC and heat/lot traceability. Ultrasonic testing or other additional examination should be specified with the applicable method, coverage and acceptance criteria rather than requested generically.
Selection boundary
Hot rolled titanium plate is commonly considered for heavier sections, fabrication stock and parts requiring machining allowance, but the manufacturing route alone does not define quality, corrosion resistance or fitness for service. Grade, final condition, surface, dimensional allowance, fabrication route and the component specification control selection.
Technical FAQ
Does hot rolled define the titanium grade?
No. Hot rolled describes part of the manufacturing route. The RFQ must separately identify the titanium grade or UNS, material specification and final condition.
Is hot rolled titanium plate always supplied annealed?
Not from the phrase hot rolled alone. ASTM B265 covers annealed plate, so an ASTM B265 order must state the required grade, revision and condition consistently.
What information is needed for a hot rolled titanium plate quotation?
Provide grade or UNS, specification and revision, final condition, thickness, width, length, tolerances, flatness, surface, edge, machining allowance, quantity, inspection, MTC and destination.
FAQ
What information is required to quote Hot Rolled Titanium Plate?
Provide the titanium grade, product form, dimensional standard or drawing, thread or critical dimensions, quantity, surface treatment, mating parts, service conditions and required inspection documents.
Which standards apply to Hot Rolled Titanium Plate?
ASTM B265 / ASME SB265 or expressly invoked project specification
How are Hot Rolled Titanium Plate inspected?
MTC review, dimensional and surface inspection, heat/lot traceability, with PMI or applicable NDT when specified
Leave Your Message
Related Technical Guides
Bulk Titanium MOQ, Price and Alternatives
Prepare a bulk RFQ and review MOQ, price drivers, documentation and optional alternatives.
Read technical guideHot Rolled vs Cold Rolled Titanium
Compare thickness range, surface, flatness, forming and machining considerations.
Read technical guideHow to Specify ASTM B265 Titanium Plate
Define grade, dimensions, condition, tolerance, surface, tests and certification.
Read technical guideThickness, Tolerance and Flatness Guide
Prepare dimensional requirements that match fabrication and machining needs.
Read technical guideChemical Processing Plate Selection
Review service chemistry, grade, fabrication, inspection and documentation.
Read technical guide