ERTi-5 Titanium Welding Wire
ERTi-5 Titanium Welding Wire supplied as spool wire, coil or straight TIG filler rod with classification, diameter, surface cleanliness, cast, helix, packaging and traceability defined by the order.
- Classification
- ERTi-5 / Ti-6Al-4V welding wire
- Standard
- AWS A5.16 / ISO 24034
- Delivery
- Spool, coil or straight TIG rod
- Documents
- Certificate, batch and heat/lot traceability
Product Detail
Product Introduction
ERTi-5 Titanium Welding Wire is a clean titanium filler metal for GTAW, GMAW or other qualified welding processes as applicable. Filler classification must be selected with the base metal, corrosion environment, joint design, shielding practice, welding procedure and required weld-metal acceptance.
What distinguishes ERTi-5 welding wire?
Selection answer: ERTi-5 is Ti-6Al-4V filler metal for qualified welding of compatible Grade 5-family alloy constructions where weld strength, ductility and service requirements support its use.
Selection boundary: Do not replace ERTi-2 or ERTi-7 with ERTi-5 merely because Grade 5 has higher base-metal strength. Alloy weldability, heat input, restraint, shielding, post-weld condition and finished-joint acceptance must be addressed by the WPS.
RFQ data to confirm: State filler classification, base-metal grades and conditions, welding process, diameter, spool or rod format, joint thickness and restraint, shielding procedure, heat treatment if any, required weld tests, quantity and traceability.
Product Specifications
| Product | ERTi-5 Titanium Welding Wire | Grade | ERTi-5 / Ti-6Al-4V welding wire |
|---|---|---|---|
| Standard | AWS A5.16 / A5.16M and ISO 24034 may classify titanium and titanium-alloy welding wire and rods. The qualified welding procedure, base material and project requirements control filler selection and weld acceptance. | Size & Form | Spool or coil wire and straight TIG rods; diameter, package weight, spool type and rod length by RFQ |
| Tolerance | AWS/ISO classification and order-defined diameter, cast, helix, straightness and surface requirements | Supply Condition | Clean bright wire in precision-layer-wound spools, protected coils or straight filler-rod bundles |
| Inspection | Classification and certificate review, chemistry, diameter, straightness or cast and helix, surface cleanliness, spool winding, batch identification and heat/lot traceability. | Documents | MTC, heat/lot traceability and agreed inspection reports |
Send the complete material RFQ
Include grade, specification revision, dimensions, tolerance, quantity, condition, tests and destination.
Chemical Composition
Weight percent; maximum unless a range is shown. Titanium is the balance. The ordered specification and grade control.
| Grade / UNS | Principal Alloying Elements | Fe max | O max | C max | N max | H max | Ti |
|---|---|---|---|---|---|---|---|
| Grade 5 / R56400 | Al 5.50–6.75; V 3.50–4.50 | 0.40 | 0.20 | 0.08 | 0.05 | 0.015 | Balance |
Mechanical Properties – Annealed Material Reference
| Grade | Ultimate Tensile Strength min | 0.2% Yield Strength min | Elongation min |
|---|---|---|---|
| Grade 5 | 895 MPa | 828 MPa | 10% |
Representative minima only. Product form, section size, heat treatment and the invoked specification determine the certified acceptance values.
Typical Physical Properties
| Grade | Density | Elastic Modulus | Thermal Expansion |
|---|---|---|---|
| Grade 5 | 4.43 g/cm³ | Approx. 114 GPa | Approx. 8.6 µm/m·K |
Typical engineering references, not inspection acceptance limits.
Certificates & Inspection Records
Services We Can Provide
Product Packaging
Wire is protected in coils, spools or straight-length bundles with moisture-resistant wrapping and labels for grade, diameter, heat and quantity. Typical export packaging for the same physical product form is shown below; final packing is confirmed for each order.
Application Scenarios
Joining compatible Ti-6Al-4V base materials under a qualified welding procedure
Material grade, dimensions, condition and inspection must be matched to the application requirements.
Chemical and marine fabrication
Material grade, dimensions, condition and inspection must be matched to the application requirements.
Aerospace and industrial welding under qualified procedures
Material grade, dimensions, condition and inspection must be matched to the application requirements.
FAQ
Can titanium welding wire be selected only from the base-metal grade?
No. Filler selection must follow the qualified welding procedure, applicable code, joint design, corrosion requirements and project acceptance criteria.
Why are surface cleanliness and packaging important?
Titanium welding is sensitive to contamination. Clean surface, protected packaging and controlled handling help prevent weld defects and loss of corrosion performance.
What information is required for quotation?
Provide AWS/ISO classification, diameter, spool/coil/rod form, package weight or rod length, quantity, process, base metal, tests and certificates.
Leave Your Message
Related Technical Guides
Welding Wire for Process Equipment
Match filler classification, base metal, procedure and service.
Read technical guideERTi-2 vs ERTi-5 vs ERTi-7 Welding Wire
Compare filler classifications and delivery forms.
Read technical guideTitanium RFQ Checklist
Prepare classification, dimensions and documentation.
Read technical guideHow to Choose a Titanium Grade
Compare Grade 2, Grade 5 and Grade 7.
Read technical guide