SAKY ALLOY · Türkçe
titanyum dövme ürünler
titanyum dövme ürünler; sınıf, ölçüler, muayene, sertifikalar ve ihracat teslimatı teyit edilerek endüstriyel tedarik için sunulur.
Teknik özellikler ve tedarik seçenekleri
| Ürün | titanyum dövme ürünler |
|---|---|
| Uluslararası ürün tanımı | Titanium Forgings |
| Standartlar | ASTM B381, AMS or drawing specification |
| Kaliteler | Grade 1, 2, 3, 4, 5, 7, 9, 12 ve 23 |
| Ölçüler | Çizim, sipariş veya mutabık kalınan şartnameye göre ölçüler ve toleranslar |
| Teslim durumu | Teslim durumu, yüzey, uç işlemi ve ambalaj siparişle birlikte teyit edilir |
Yaygın uygulamalar
- Havacılık ve enerji bileşenleri
- Kimya ve deniz ekipmanları
- Medikal ve hassas işlenmiş parçalar
Kalite ve izlenebilirlik
Siparişe göre EN 10204 3.1 sertifikası, ısı/parti izlenebilirliği, boyutsal ve görsel kontrol ile PMI, UT veya PT sunulur.
Hızlı teklif için gerekli bilgiler
- Ürün formu ve titanyum kalitesi
- Standart ve teslim durumu
- Ölçüler, toleranslar ve miktar
- Testler, belgeler ve ambalaj
- Teslim yeri ve istenen tarih
İlgili titanyum ürünleri
Titanyum teklifi mi gerekiyor?
Çizim veya şartnamenizi gönderin. Stok durumu, teknik değerlendirme ve fiyatla yanıt verelim.
Technical sourcing guide
Titanium Forgings, Blocks, Rings & Discs: specifications, grades and supply options
Use the information below to prepare a clear RFQ. Final availability depends on grade, size, quantity, specification revision and required documentation.
ASTM B381 / ASME SB381 for general titanium forgings; aerospace and drawing-controlled orders use the applicable AMS specification or customer requirement.
Commercially pure Grades 1, 2, 3 and 4 plus alloy Grades 5, 7, 12 and 23, subject to section size, forging route and specification.
Forged blocks, discs, rings, shafts and near-net shapes; final dimensions, machining allowance, grain-flow and heat-treatment requirements are RFQ-controlled.
MTC, heat traceability, dimensional inspection and surface examination; UT, liquid-penetrant, macrostructure and microstructure testing when specified.
Typical applications
- Aerospace structures and rotating components
- Chemical and pressure-equipment parts
- Marine, offshore and energy components
- High-integrity rings, hubs, blocks and machined parts
How to specify titanium forgings, blocks, rings & discs for quotation
Provide these purchasing details so material availability, manufacturing route, inspection scope and delivery can be reviewed without avoidable follow-up.
- Product form and titanium grade
- Governing standard and revision
- Dimensions, tolerances and quantity
- Surface, edge, end or machining requirements
- Application and service environment
- Inspection, certificate, packaging and destination requirements
Technical selection guides
Frequently asked sourcing questions
Which standard and grade should I specify?
ASTM B381 / ASME SB381 for general titanium forgings; aerospace and drawing-controlled orders use the applicable AMS specification or customer requirement. The final grade, revision and supplementary requirements should be stated on the RFQ or purchase order.
Can size and tolerance be customized?
Forged blocks, discs, rings, shafts and near-net shapes; final dimensions, machining allowance, grain-flow and heat-treatment requirements are RFQ-controlled. Final dimensional tolerances are confirmed against the governing standard or customer drawing.
What inspection and documentation are available?
MTC, heat traceability, dimensional inspection and surface examination; UT, liquid-penetrant, macrostructure and microstructure testing when specified.. Supply condition: Production route, surface finish, packaging and delivery documents are confirmed at quotation.
Send the standard, grade, dimensions, quantity, application and certificate requirements.