🇬🇧 ENGLISH
Grade 5 Titanium Wing Nuts

Grade 5 Titanium Wing Nuts

Grade 5 Titanium Wing Nuts with integral hand-tightening wings for corrosion-resistant assemblies requiring frequent adjustment or tool-free access. Thread, wing form and inspection are order-defined.

Material
Grade 5 / Ti-6Al-4V / UNS R56400
Form
Two-wing hand-tightening nut
Threads
Metric, UNC, UNF or drawing
Documents
MTC, dimensions and thread inspection
CONTACT US

Product Detail

Product Introduction

Grade 5 Titanium Wing Nuts provide two integral wings for manual tightening and removal where tool-free adjustment is useful. Manual input limits achievable preload, and the wings introduce clearance and snag considerations. Define thread engagement, mating fastener, frequency of adjustment, vibration, retention method and permitted hand torque.

Product Specifications

ProductGrade 5 Titanium Wing NutsMaterialTitanium Grade 5 / Ti-6Al-4V / UNS R56400
Product FormStandard or drawing-specific titanium fastenerTypical Inquiry RangeMetric, inch and custom sizes confirmed at RFQ stage
Dimensional ReferencesExpressly invoked standard or approved drawingThreads / DimensionsMetric coarse or fine, UNC, UNF or drawing-specific as applicable
SurfaceMachined and cleaned; lubricant, anti-galling treatment or coating by agreementDocumentsMTC, heat/lot traceability and dimensional inspection report
InspectionDimensions, thread gauging, surface and agreed functional or mechanical testsSupply BasisApproved purchase order, invoked standard and drawing

Typical inquiry ranges are not a stock guarantee. Final manufacturability, tolerances and test requirements are confirmed against the complete RFQ.

Selection and Configuration

  • Hand adjustment: Confirm that manually achievable torque and clamp load are suitable for the joint and duty.
  • Wing envelope: Define overall width, height, wing thickness and surrounding clearance for fingers and nearby components.
  • Retention and vibration: If loosening resistance is required, specify a compatible secondary retention feature rather than assuming wing geometry provides locking.
Standards and ordering definition: DIN 315 or an approved drawing may define wing-nut geometry when expressly invoked. The order must separately define titanium grade, condition, thread class, manufacturing route, mechanical acceptance, tests and documentation.

Send a drawing or complete fastener definition
Include dimensions, quantity, mating parts, service conditions, finish and inspection requirements.

Request a Quotation

Chemical Composition – Titanium Grade 5

Weight percent. Values are material limits; titanium is the balance.

AlVFe maxO maxC maxN maxH maxResidual each / totalTi
5.50–6.753.50–4.500.400.200.080.050.0150.10 / 0.40Balance

Mechanical Properties – Grade 5 Material Reference

PropertyAnnealed Grade 5 Material Reference Minimum
Ultimate tensile strength895 MPa (130 ksi)
0.2% yield strength828 MPa (120 ksi)
Elongation10%
Reduction of area25%

Material values do not automatically establish finished-fastener loadability. Finished-part acceptance depends on geometry, manufacturing route, condition and the expressly invoked fastener specification or drawing.

Typical Physical Properties

PropertyTypical Value
Density4.43 g/cm³
Elastic modulusApproximately 114 GPa
Poisson ratioApproximately 0.34
Thermal conductivityApproximately 6.7 W/m·K
Coefficient of thermal expansionApproximately 8.6 µm/m·K
Melting rangeApproximately 1604–1660°C

Physical values are typical engineering references and are not inspection acceptance limits.

Certificates & Inspection Records

SAKY ALLOY quality management system certificate

Services We Can Provide

Drawing ReviewGeometry, thread, tolerances and mating-component review.
Custom ManufacturingMetric, inch and drawing-specific production subject to review.
InspectionDimensional checks, thread gauging and agreed functional testing.
Surface OptionsCleaning, identification, lubricant or coating by agreement.
TraceabilityMTC, heat/lot records and inspection documentation.
Export SupportProtected packing, labeling and shipping documents.

Product Packaging

Grade 5 Titanium Wing Nuts are separated by size and lot, protected against thread and surface damage, and labeled with grade, dimensions, quantity and traceability reference. Inner bags, cartons and export cases are selected according to product geometry, quantity and shipping method.

Application Scenarios

Chemical processing equipment application environment

Chemical Processing

Corrosion-resistant equipment joints selected against the complete process environment.

Power and energy equipment application environment

Power & Energy

Lightweight engineered assemblies requiring controlled dimensions and traceability.

Marine and shipbuilding application environment

Marine & Shipbuilding

Corrosion-resistant joints subject to galvanic, preload and service-condition review.

FAQ

Are wing nuts suitable for high-preload joints?

They are mainly intended for hand adjustment and normally cannot develop the controlled preload of a wrench-tightened nut. The joint must be designed accordingly.

Do titanium wing nuts resist vibration loosening?

Wing form alone is not a locking feature. Vibration duty may require a compatible lock washer, prevailing-torque element, pin or another validated retention method.

What should be included in an RFQ?

Provide titanium grade, standard or drawing, thread and fit, wing dimensions, quantity, mating fastener, adjustment duty, retention, tests and certificates.

Leave Your Message

Related Technical Guides

WhatsApp