Precision titanium round bars and rods on an inspection table

Titanium bar & rod · ASTM B348

titanyum sınıf 11 çubuklar

titanyum sınıf 11 çubuklar; sınıf, ölçüler, muayene, sertifikalar ve ihracat teslimatı teyit edilerek endüstriyel tedarik için sunulur.

  • ASTM B348 and AMS options
  • Cut, peeled and ground supply
  • MTC and heat traceability

Titanium Grade 11 Bars

Grade 11 titanium bar and rod, UNS R52250, for specified corrosion service. Request ASTM B348/B348M or an agreed standard, diameter, length, condition and inspection.

Material
Titanium Grade 11 / UNS R52250
Standard
ASTM B348 / ASME SB348
Product Form
Round bar, rod and cut blanks; diameter, length, straightness and machining allowance are confirmed by RFQ
Documents
MTC, inspection and heat/lot traceability
CONTACT US

Grade 11 Titanium Bar & Rod

Grade 11 titanium bar and rod are solid titanium products identified as UNS R52250. The grade contains palladium and is considered for corrosion service where the process medium and operating conditions justify its selection. ASTM B348/B348M covers titanium bar and billet; an order should identify the applicable edition and any additional requirements. For machining stock, define diameter, length, straightness, surface and machining allowance as well as the material condition. Supply is reviewed against the requested size, quantity, inspection and documentation. The pictured round bar illustrates the product form; grade and conformity are established by the order and material records.

Request a Grade 11 Bar Quote
Two large-diameter titanium round bars on a machine bed

Specifications & Ordering

MaterialTitanium Grade 11 / UNS R52250, titanium with palladium
Product formSolid round bar or rod; cut lengths and dimensions subject to order review
Material standardASTM B348/B348M or ASME SB348 when specified; state the required edition
DimensionsDiameter, length, tolerance, straightness, end condition and machining allowance by RFQ
Condition and surfaceSpecify condition, finish and surface acceptance requirements on the order
Inspection and documentsState required dimensional checks, material test certificate, heat traceability and supplementary tests

Grade Selection & Material Verification

Grade 11 and Grade 7 are different UNS designations and must not be interchanged solely because both contain palladium. Review the specified grade, chemistry, mechanical requirements and condition against the governing edition and actual material certificate. Corrosion suitability depends on the medium, concentration, temperature, crevices and operating conditions; the equipment designer should confirm the selection.

Names such as TA11 or search references to AMS 4921 do not by themselves establish equivalence or certification. Identify the required standard and grade explicitly before ordering.

Applications & Inspection

Round bar can be considered as machining stock for components in chemical processing, marine or desalination equipment where Grade 11 is specified. Confirm the component design, material compatibility, fabrication and service environment for each project.

For quotation, include material standard and revision, diameter and length, quantity, condition, tolerance, surface, destination, required MTC, heat identification and any agreed testing. Packaging and identification should be agreed for the shipment.

Send Your Requirements

FAQ

What is Grade 11 titanium bar?

Grade 11 / UNS R52250 is a titanium-palladium grade. ASTM B348/B348M covers titanium bars and billets; the purchase order should identify the required edition and condition.

Is Grade 11 the same as Grade 7?

No. Grade 11 is UNS R52250 and Grade 7 is UNS R52400. Do not substitute one for the other without engineering and specification approval.

What should I include in a Grade 11 bar RFQ?

Provide the standard and revision, diameter, length, quantity, condition, surface and dimensional tolerances, service environment, tests, certificates and destination.

Does AMS 4921 identify Grade 11 bar?

Do not assume that a search term or an AMS number establishes Grade 11 compliance. State the exact specified grade and standard so the requirements can be checked before quotation.

Titanium Grade 11 Selection Guides and Related Product Forms

Grade 11 / UNS R52250 is a Grade 1-based, palladium-bearing commercially pure titanium grade. Select it for a documented corrosion requirement rather than as a universal strength upgrade over Grade 2. Review Grade 11 vs Grade 2 corrosion selection and Grade 11 properties, fatigue and corrosion limits.

Related forms: Grade 11 bar and rod, Grade 11 pipe and Grade 11 sheet and plate. For bulk quotation, provide the product standard and edition, size, condition, quantity or total weight, service medium and temperature, testing, certificate requirements and destination.

Leave Your Message

Related Technical Guides

WhatsApp