SAKY ALLOY · Bahasa Indonesia
titanium koil strip
titanium koil strip untuk pengadaan industri dengan grade, dimensi, inspeksi, sertifikat, dan pengiriman ekspor yang dikonfirmasi.
Spesifikasi teknis dan opsi pasokan
| Produk | titanium koil strip |
|---|---|
| Nama produk internasional | Titanium Coil Strip |
| Standar | ASTM B265 / ASME SB265 |
| Grade | Grade 1, 2, 3, 4, 5, 7, 9, 12 dan 23 |
| Dimensi | Dimensi dan toleransi sesuai gambar, pesanan, atau spesifikasi yang disepakati |
| Kondisi pasokan | Kondisi suplai, permukaan, pengerjaan ujung, dan kemasan dikonfirmasi saat pemesanan |
Aplikasi umum
- Bejana dan penukar panas
- Sistem laut dan desalinasi
- Manufaktur dirgantara, medis dan industri
Kualitas dan ketertelusuran
Sesuai pesanan tersedia sertifikat EN 10204 3.1, ketertelusuran heat, inspeksi dimensi dan visual, serta PMI, UT atau PT.
Informasi untuk penawaran cepat
- Bentuk produk dan grade titanium
- Standar dan kondisi pasokan
- Dimensi, toleransi dan jumlah
- Pengujian, dokumen dan kemasan
- Tujuan dan jadwal pengiriman
Produk titanium terkait
Memerlukan penawaran titanium?
Kirim gambar atau spesifikasi. Kami akan membalas dengan ketersediaan, tinjauan teknis dan harga.
Technical sourcing guide
Titanium Coil, Strip & Precision Slit Material: specifications, grades and supply options
Use the information below to prepare a clear RFQ. Final availability depends on grade, size, quantity, specification revision and required documentation.
ASTM B265 / ASME SB265 for titanium strip and sheet supplied in coil form; the applicable revision and supplementary requirements are confirmed by RFQ.
Commercially pure Grades 1, 2, 3 and 4 plus alloy Grades 5, 7 and 12, subject to thickness, width, temper and production availability.
Coil and slit strip supplied by thickness, width, coil inside/outside diameter, coil weight, edge condition and surface finish.
MTC, heat/lot traceability, thickness and width checks, surface inspection, edge inspection and packaging controls as specified.
Buyer decision point
Coil, slit strip and foil should be quoted by actual thickness and width rather than by product name alone. Also state coil ID/OD, maximum coil weight, edge condition, temper, flatness or camber limits, surface finish and whether the material will be stamped, formed, welded or used as corrosion-resistant lining.
Typical applications
- Heat-exchanger and plate heat-exchanger components
- Chemical process equipment and corrosion-resistant linings
- Precision stamping, formed parts and bellows
- Springs, clips, shims and specialist industrial components
How to specify titanium coil, strip & precision slit material for quotation
Provide these purchasing details so material availability, manufacturing route, inspection scope and delivery can be reviewed without avoidable follow-up.
- Product form and titanium grade
- Governing standard and revision
- Dimensions, tolerances and quantity
- Surface, edge, end or machining requirements
- Application and service environment
- Inspection, certificate, packaging and destination requirements
Technical selection guides
Frequently asked sourcing questions
Which standard and grade should I specify?
ASTM B265 / ASME SB265 for titanium strip and sheet supplied in coil form; the applicable revision and supplementary requirements are confirmed by RFQ. The final grade, revision and supplementary requirements should be stated on the RFQ or purchase order.
Can size and tolerance be customized?
Coil and slit strip supplied by thickness, width, coil inside/outside diameter, coil weight, edge condition and surface finish. Final dimensional tolerances are confirmed against the governing standard or customer drawing.
What inspection and documentation are available?
MTC, heat/lot traceability, thickness and width checks, surface inspection, edge inspection and packaging controls as specified.. Supply condition: Production route, surface finish, packaging and delivery documents are confirmed at quotation.
Send the standard, grade, dimensions, quantity, application and certificate requirements.