SAKY ALLOY · العربية
تيتانيوم لفائف شريط
تيتانيوم لفائف شريط للتوريد الصناعي مع تأكيد الدرجة والأبعاد والفحص والشهادات وتسليم التصدير.
المواصفات الفنية وخيارات التوريد
| المنتج | تيتانيوم لفائف شريط |
|---|---|
| التسمية الدولية للمنتج | Titanium Coil Strip |
| المواصفات | ASTM B265 / ASME SB265 |
| الدرجات | الدرجات 1 و2 و3 و4 و5 و7 و9 و12 و23 |
| الأبعاد | الأبعاد والسماحات حسب الرسم أو الطلب أو المواصفة المتفق عليها |
| حالة التوريد | يتم تأكيد حالة التوريد والسطح وتجهيز الأطراف والتعبئة مع الطلب |
التطبيقات الشائعة
- أوعية الضغط والمبادلات الحرارية
- الأنظمة البحرية والتحلية
- تصنيع الطيران والطب والصناعة
الجودة وإمكانية التتبع
نوفر حسب الطلب شهادة EN 10204 3.1 وتتبع الصهرة وفحص الأبعاد والمظهر، إضافة إلى PMI أو UT أو PT عند الطلب.
بيانات مطلوبة للتسعير السريع
- شكل المنتج ودرجة التيتانيوم
- المواصفة وحالة التوريد
- الأبعاد والسماحات والكمية
- الفحوص والوثائق والتعبئة
- وجهة التسليم والموعد المطلوب
منتجات تيتانيوم ذات صلة
هل تحتاج إلى عرض سعر للتيتانيوم؟
أرسل الرسم أو المواصفات وسنرد بالتوفر والمراجعة الفنية والسعر.
Technical sourcing guide
Titanium Coil, Strip & Precision Slit Material: specifications, grades and supply options
Use the information below to prepare a clear RFQ. Final availability depends on grade, size, quantity, specification revision and required documentation.
ASTM B265 / ASME SB265 for titanium strip and sheet supplied in coil form; the applicable revision and supplementary requirements are confirmed by RFQ.
Commercially pure Grades 1, 2, 3 and 4 plus alloy Grades 5, 7 and 12, subject to thickness, width, temper and production availability.
Coil and slit strip supplied by thickness, width, coil inside/outside diameter, coil weight, edge condition and surface finish.
MTC, heat/lot traceability, thickness and width checks, surface inspection, edge inspection and packaging controls as specified.
Buyer decision point
Coil, slit strip and foil should be quoted by actual thickness and width rather than by product name alone. Also state coil ID/OD, maximum coil weight, edge condition, temper, flatness or camber limits, surface finish and whether the material will be stamped, formed, welded or used as corrosion-resistant lining.
Typical applications
- Heat-exchanger and plate heat-exchanger components
- Chemical process equipment and corrosion-resistant linings
- Precision stamping, formed parts and bellows
- Springs, clips, shims and specialist industrial components
How to specify titanium coil, strip & precision slit material for quotation
Provide these purchasing details so material availability, manufacturing route, inspection scope and delivery can be reviewed without avoidable follow-up.
- Product form and titanium grade
- Governing standard and revision
- Dimensions, tolerances and quantity
- Surface, edge, end or machining requirements
- Application and service environment
- Inspection, certificate, packaging and destination requirements
Technical selection guides
Frequently asked sourcing questions
Which standard and grade should I specify?
ASTM B265 / ASME SB265 for titanium strip and sheet supplied in coil form; the applicable revision and supplementary requirements are confirmed by RFQ. The final grade, revision and supplementary requirements should be stated on the RFQ or purchase order.
Can size and tolerance be customized?
Coil and slit strip supplied by thickness, width, coil inside/outside diameter, coil weight, edge condition and surface finish. Final dimensional tolerances are confirmed against the governing standard or customer drawing.
What inspection and documentation are available?
MTC, heat/lot traceability, thickness and width checks, surface inspection, edge inspection and packaging controls as specified.. Supply condition: Production route, surface finish, packaging and delivery documents are confirmed at quotation.
Send the standard, grade, dimensions, quantity, application and certificate requirements.