SAKY ALLOY · Português
titânio bobina tira
titânio bobina tira para compras industriais com grau, dimensões, inspeção, certificados e entrega de exportação confirmados.
Especificações técnicas e opções de fornecimento
| Produto | titânio bobina tira |
|---|---|
| Designação internacional do produto | Titanium Coil Strip |
| Normas | ASTM B265 / ASME SB265 |
| Graus | Graus 1, 2, 3, 4, 5, 7, 9, 12 e 23 |
| Dimensões | Dimensões e tolerâncias conforme desenho, pedido ou especificação acordada |
| Condição de fornecimento | Condição de fornecimento, superfície, acabamento das extremidades e embalagem confirmados no pedido |
Aplicações comuns
- Vasos e trocadores de calor
- Sistemas marinhos e dessalinização
- Fabricação aeroespacial, médica e industrial
Qualidade e rastreabilidade
Conforme o pedido, fornecemos certificado EN 10204 3.1, rastreabilidade de corrida, inspeção dimensional e visual, além de PMI, UT ou PT.
Informações para cotação rápida
- Forma do produto e grau de titânio
- Norma e condição de fornecimento
- Dimensões, tolerâncias e quantidade
- Ensaios, documentos e embalagem
- Destino e prazo de entrega
Produtos de titânio relacionados
Precisa de uma cotação de titânio?
Envie o desenho ou a especificação. Responderemos com disponibilidade, análise técnica e preço.
Technical sourcing guide
Titanium Coil, Strip & Precision Slit Material: specifications, grades and supply options
Use the information below to prepare a clear RFQ. Final availability depends on grade, size, quantity, specification revision and required documentation.
ASTM B265 / ASME SB265 for titanium strip and sheet supplied in coil form; the applicable revision and supplementary requirements are confirmed by RFQ.
Commercially pure Grades 1, 2, 3 and 4 plus alloy Grades 5, 7 and 12, subject to thickness, width, temper and production availability.
Coil and slit strip supplied by thickness, width, coil inside/outside diameter, coil weight, edge condition and surface finish.
MTC, heat/lot traceability, thickness and width checks, surface inspection, edge inspection and packaging controls as specified.
Buyer decision point
Coil, slit strip and foil should be quoted by actual thickness and width rather than by product name alone. Also state coil ID/OD, maximum coil weight, edge condition, temper, flatness or camber limits, surface finish and whether the material will be stamped, formed, welded or used as corrosion-resistant lining.
Typical applications
- Heat-exchanger and plate heat-exchanger components
- Chemical process equipment and corrosion-resistant linings
- Precision stamping, formed parts and bellows
- Springs, clips, shims and specialist industrial components
How to specify titanium coil, strip & precision slit material for quotation
Provide these purchasing details so material availability, manufacturing route, inspection scope and delivery can be reviewed without avoidable follow-up.
- Product form and titanium grade
- Governing standard and revision
- Dimensions, tolerances and quantity
- Surface, edge, end or machining requirements
- Application and service environment
- Inspection, certificate, packaging and destination requirements
Technical selection guides
Frequently asked sourcing questions
Which standard and grade should I specify?
ASTM B265 / ASME SB265 for titanium strip and sheet supplied in coil form; the applicable revision and supplementary requirements are confirmed by RFQ. The final grade, revision and supplementary requirements should be stated on the RFQ or purchase order.
Can size and tolerance be customized?
Coil and slit strip supplied by thickness, width, coil inside/outside diameter, coil weight, edge condition and surface finish. Final dimensional tolerances are confirmed against the governing standard or customer drawing.
What inspection and documentation are available?
MTC, heat/lot traceability, thickness and width checks, surface inspection, edge inspection and packaging controls as specified.. Supply condition: Production route, surface finish, packaging and delivery documents are confirmed at quotation.
Send the standard, grade, dimensions, quantity, application and certificate requirements.