Ti-15-3-3-3 Titanium Wire
Ti-15-3-3-3 Titanium Wire supplied to the specified dimensions, condition, tolerance, inspection and material-traceability requirements for industrial procurement.
- Material
- Ti-15V-3Cr-3Sn-3Al metastable beta titanium alloy
- Standard
- Applicable AMS, GB/T or customer specification
- Product Form
- Coil, spool or straight wire; diameter, tolerance, package form and weight are confirmed by RFQ
- Documents
- MTC, inspection and heat/lot traceability
Product Detail
Product Introduction
Ti-15-3-3-3 Titanium Wire is supplied for corrosion-resistant fabrication and precision manufacturing. The final purchase definition must identify the exact material designation, governing specification and revision, dimensions, condition, tolerances, tests and documentation; trade-name or cross-standard equivalence is not assumed.
Product Specifications
| Product | Ti-15-3-3-3 Titanium Wire | Grade | Ti-15V-3Cr-3Sn-3Al metastable beta titanium alloy |
|---|---|---|---|
| Standard | Applicable AMS, GB/T or customer specification | Size & Form | Coil, spool or straight wire; diameter, tolerance, package form and weight are confirmed by RFQ |
| Tolerance | Governing material standard or approved customer drawing | Supply Condition | Bright or pickled surface in coil, spool or straight length |
| Inspection | MTC review, dimensional and surface inspection, heat/lot traceability, with PMI or applicable NDT when specified | Documents | MTC, heat/lot traceability and agreed inspection reports |
Send the complete material RFQ
Include grade, specification revision, dimensions, tolerance, quantity, condition, tests and destination.
Chemical Composition
Weight percent; maximum unless a range is shown. Titanium is the balance. The ordered specification and grade control.
| Grade / UNS | Principal Alloying Elements | Fe max | O max | C max | N max | H max | Ti |
|---|---|---|---|---|---|---|---|
| Ti-15-3-3-3 | V 14.0–16.0; Cr 2.5–3.5; Sn 2.5–3.5; Al 2.8–3.6 | 0.25 | 0.13 | 0.05 | Specification-controlled | 0.015 | Balance |
Mechanical Properties – Annealed Material Reference
| Grade | Ultimate Tensile Strength min | 0.2% Yield Strength min | Elongation min |
|---|---|---|---|
| Ti-15-3-3-3 | Properties vary substantially between solution-treated and aged conditions. The applicable AMS/customer specification and heat treatment must define acceptance. | ||
Representative minima only. Product form, section size, heat treatment and the invoked specification determine the certified acceptance values.
Typical Physical Properties
| Grade | Density | Elastic Modulus | Thermal Expansion |
|---|---|---|---|
| Ti-15-3-3-3 | Approx. 4.76 g/cm³ | Condition-dependent; verify for design | Verify against approved engineering data |
Typical engineering references, not inspection acceptance limits.
Certificates & Inspection Records
Services We Can Provide
Product Packaging
Wire is protected in coils, spools or straight-length bundles with moisture-resistant wrapping and labels for grade, diameter, heat and quantity. Typical export packaging for the same physical product form is shown below; final packing is confirmed for each order.
Application Scenarios
Chemical processing equipment
Material grade, dimensions, condition and inspection must be matched to the application requirements.
Marine and desalination systems
Material grade, dimensions, condition and inspection must be matched to the application requirements.
Industrial fabrication and precision components
Material grade, dimensions, condition and inspection must be matched to the application requirements.
FAQ
What information is required to quote Ti-15-3-3-3 Titanium Wire?
Provide the titanium grade, product form, dimensional standard or drawing, thread or critical dimensions, quantity, surface treatment, mating parts, service conditions and required inspection documents.
Which standards apply to Ti-15-3-3-3 Titanium Wire?
Applicable AMS, GB/T or customer specification
How are Ti-15-3-3-3 Titanium Wire inspected?
MTC review, dimensional and surface inspection, heat/lot traceability, with PMI or applicable NDT when specified
Leave Your Message
Related Technical Guides
How to Choose a Titanium Grade
Compare grade, strength, corrosion environment and fabrication needs.
Read technical guideTitanium RFQ Checklist
Prepare dimensions, standards, tests and documentation.
Read technical guideComplete Titanium Product Guide
Compare titanium product forms and sourcing considerations.
Read technical guide