Titanium Hollow Bar
Titanium Hollow Bar supplied by grade, product specification, section dimensions, length, tolerances, straightness, surface, condition and inspection requirements.
- Grades
- Grade 2, Grade 5 or specified titanium grade
- Standard
- Approved seamless tube, forging or customer specification
- Form
- Thick-wall hollow machining stock
- Documents
- MTC, dimensions and heat/lot traceability
Product Detail
Product Introduction
Titanium Hollow Bar is thick-wall hollow machining stock selected when its section geometry reduces machining, improves material yield or supports the finished component design. Grade, dimensions, tolerances, condition and manufacturing route must be confirmed for the required section.
Product Specifications
| Product | Titanium Hollow Bar | Grade | Titanium Grade 2, Grade 5 or specified alloy |
|---|---|---|---|
| Standard | Approved seamless tube, forging or customer specification may govern the ordered product where its scope covers the grade and section. Special hollow stock or nonstandard sections may require an approved forging, seamless-tube or customer specification and inspection plan. | Size & Form | Thick-wall hollow machining stock by exact section dimensions, length and cut-to-size requirements |
| Tolerance | Applicable product specification or order-defined section, straightness, twist/camber, length, corner and surface tolerances | Supply Condition | Hot worked, cold worked, annealed, ground, peeled or machined as agreed, in protected bundles or export cases |
| Inspection | MTC and heat traceability, section dimensions, length and straightness, twist or camber where applicable, surface and ends, dimensional mapping, PMI or ultrasonic testing when specified. | Documents | MTC, heat/lot traceability and agreed inspection reports |
Send the complete material RFQ
Include grade, specification revision, dimensions, tolerance, quantity, condition, tests and destination.
Chemical Composition
Weight percent; maximum unless a range is shown. Titanium is the balance. The ordered specification and grade control.
| Grade / UNS | Principal Alloying Elements | Fe max | O max | C max | N max | H max | Ti |
|---|---|---|---|---|---|---|---|
| Grade 2 / R50400 | — | 0.30 | 0.25 | 0.08 | 0.03 | 0.015 | Balance |
| Grade 5 / R56400 | Al 5.50–6.75; V 3.50–4.50 | 0.40 | 0.20 | 0.08 | 0.05 | 0.015 | Balance |
Mechanical Properties – Annealed Material Reference
| Grade | Ultimate Tensile Strength min | 0.2% Yield Strength min | Elongation min |
|---|---|---|---|
| Grade 2 | 345 MPa | 275 MPa | 20% |
| Grade 5 | 895 MPa | 828 MPa | 10% |
Representative minima only. Product form, section size, heat treatment and the invoked specification determine the certified acceptance values.
Typical Physical Properties
| Grade | Density | Elastic Modulus | Thermal Expansion |
|---|---|---|---|
| Grade 2 | 4.51 g/cm³ | Approx. 105 GPa | Approx. 8.6 µm/m·K |
| Grade 5 | 4.43 g/cm³ | Approx. 114 GPa | Approx. 8.6 µm/m·K |
Typical engineering references, not inspection acceptance limits.
Certificates & Inspection Records
Services We Can Provide
Product Packaging
Bars and rods are separated by grade and heat, protected against surface damage and secured in bundles or export cases with identification and traceability labels.
Application Scenarios
Machined rings, sleeves, bushings and components requiring reduced material removal
Material grade, dimensions, condition and inspection must be matched to the application requirements.
Aerospace, marine and chemical equipment
Material grade, dimensions, condition and inspection must be matched to the application requirements.
CNC-machined custom titanium components
Material grade, dimensions, condition and inspection must be matched to the application requirements.
FAQ
Why order a shaped titanium bar instead of round bar?
A near-net section can reduce machining time and material removal when its tolerances and availability suit the finished part.
Does one standard cover every titanium bar shape?
No. Confirm that the invoked specification covers the grade, section and manufacturing route; special hollow or custom sections may use another approved specification.
What information is required for quotation?
Provide grade, specification, section dimensions and tolerances, length, quantity, condition, surface, tests and certificates.
Leave Your Message
Related Technical Guides
Titanium Hex, Square, Flat and Hollow Bar Guide
Compare section geometry and RFQ data.
Read technical guideTitanium Bar Straightness and Tolerance
Define dimensional acceptance.
Read technical guideTitanium RFQ Checklist
Prepare grade, dimensions and documents.
Read technical guide