TECHNICAL ARTICLES & COMPANY NEWS
Latest Titanium Articles and Guides
563 published articlesHow to Specify Titanium Fluid Manifolds
Specify titanium fluid manifolds by media, flow diagram, ports, passages, wall, sealing, pressure/leak testing, cleaning, inspection and RFQ requirements.
Read MoreTitanium Vessel Heads and Forged Nozzles for Corrosive Process Equipment
Application guide to titanium vessel heads and forged nozzles for chemical, seawater, desalination and heat-transfer equipment.
Read MoreHow to Specify Titanium Forged Nozzles
Specify titanium forged nozzles by finished pressure-boundary geometry, forging envelope, material route, weld end, NDE, inspection and traceability.
Read MoreTitanium Pressure Vessel Head Types and Selection
Select titanium pressure vessel heads by ellipsoidal, torispherical or hemispherical profile, finished thickness, forming, welding, NDE and RFQ requirements.
Read MoreTitanium Inserts, Spacers and Standoffs for Corrosion-Resistant Assemblies
Application guide to titanium threaded inserts, spacers and standoffs for marine, aerospace, chemical and instrument assemblies.
Read MoreHow to Specify Titanium Spacers and Standoffs
Specify titanium spacers and standoffs by body form, bore or threads, length, male projection, tolerances, load, mating hardware and inspection.
Read MoreTitanium Threaded Inserts vs Tapped Holes
Compare titanium threaded inserts and directly tapped holes by parent material, service cycles, repairability, thread strength, wall section and inspection.
Read MoreTitanium Pin Retention Systems: Clevis, Cotter, Spring and Retaining Rings
Application guide to selecting titanium clevis pins, cotter pins, spring pins and retaining rings for marine, aerospace and process equipment.
Read MoreHow to Specify Titanium Spring Pins
A practical RFQ guide to titanium slotted spring pins covering geometry, hole limits, material condition, insertion force, loads and testing.
Read MoreTitanium Cotter Pins vs Spring Pins
Compare titanium cotter pins and spring pins by retention method, installation, mating-hole requirements, removability and validation.
Read MoreTitanium Pins and Retaining Rings for Marine, Aerospace and Process Equipment
Application guide to titanium clevis pins, dowel pins and retaining rings for lightweight and corrosion-resistant mechanical assemblies.
Read MoreHow to Specify Titanium Retaining Rings
Specify titanium internal and external retaining rings by shaft or bore, groove, section, free diameter, material condition, load and installation.
Read More