🇬🇧 ENGLISH

Grade 2 Titanium Stud Bolts and Threaded Rods

Commercially pure Grade 2 titanium studs and threaded rods for corrosion-resistant assemblies. Thread form, engagement, length, end configuration, mating nuts, finish and inspection follow the order specification or drawing.

Material: Grade 2 / UNS R50400
Forms: Stud bolts, full or partial threaded rod
Threads: Metric, UNC, UNF or drawing
Documents: MTC, thread and dimensional report

Product Detail

Product Introduction

Grade 2 studs and threaded rods provide commercially pure titanium corrosion resistance for adjustable-engagement and double-ended joints. The RFQ must define each thread, overall and threaded lengths, end form, mating nuts, service environment, preload and inspection.

Product Specifications

Product	Grade 2 Titanium Stud Bolts and Threaded Rods	Material	Titanium Grade 2 (UNS R50400)
Product Form	Fully threaded, double-end or tap-end stud / threaded rod	Typical Inquiry Range	M3 to M36 typical inquiry range; UNC, UNF and drawing-specific sizes by review
Dimensional References	ASTM F468/F468M, ASME B18, DIN or approved drawing when applicable	Threads / Dimensions	Metric coarse or fine, UNC, UNF or drawing-specific as applicable
Surface	Machined and cleaned; lubricant, anti-galling treatment or coating by agreement	Documents	MTC, heat/lot traceability and dimensional inspection report
Inspection	Dimensions, thread gauging, surface and agreed functional or mechanical tests	Supply Basis	Approved purchase order, invoked standard and drawing

Typical inquiry ranges are not a stock guarantee. Final manufacturability, tolerances and test requirements are confirmed against the complete RFQ.

Selection and Configuration

Thread configuration: Specify fully threaded, double-end or tap-end form, class, engagement and runout.
Length and ends: Define overall length, thread lengths, chamfers, points or driving features by drawing.
Joint compatibility: Confirm mating nut grade, temperature, load, galvanic exposure, lubrication and galling controls.

Standards and ordering definition: ASTM F468/F468M may apply when expressly specified; ASME B18, DIN and project references may control dimensions. Grade 2 material condition and finished-fastener acceptance remain separately controlled.

Send a drawing or complete fastener definition
Include dimensions, quantity, mating parts, service conditions, finish and inspection requirements.

Request a Quotation

Chemical Composition – Titanium Grade 2

Maximum weight percent unless shown otherwise; titanium is the balance.

N max	C max	H max	Fe max	O max	Residual each / total	Ti
0.03	0.08	0.015	0.30	0.25	0.10 / 0.40	Balance

Mechanical Properties – Grade 2 Material Reference

Property	Annealed Grade 2 Material Reference Minimum
Ultimate tensile strength	345 MPa (50 ksi)
0.2% yield strength	275 MPa (40 ksi)
Elongation	20%

Material values do not automatically establish finished-fastener loadability. Finished-part acceptance depends on geometry, manufacturing route, condition and the expressly invoked fastener specification or drawing.

Typical Physical Properties

Property	Typical Value
Density	4.51 g/cm³
Elastic modulus	Approximately 105 GPa
Poisson ratio	Approximately 0.34
Thermal conductivity	Approximately 16.4 W/m·K
Coefficient of thermal expansion	Approximately 8.6 µm/m·K
Melting point	Approximately 1668°C

Physical values are typical engineering references and are not inspection acceptance limits.

Certificates & Inspection Records

SAKY ALLOY quality management system certificate

Services We Can Provide

Drawing ReviewGeometry, thread, tolerances and mating-component review.

Custom ManufacturingMetric, inch and drawing-specific production subject to review.

InspectionDimensional checks, thread gauging and agreed functional testing.

Surface OptionsCleaning, identification, lubricant or coating by agreement.

TraceabilityMTC, heat/lot records and inspection documentation.

Export SupportProtected packing, labeling and shipping documents.

Product Packaging

Grade 2 Titanium Stud Bolts and Threaded Rods are separated by size and lot, protected against thread and surface damage, and labeled with grade, dimensions, quantity and traceability reference. Inner bags, cartons and export cases are selected according to product geometry, quantity and shipping method.

Application Scenarios

Chemical Processing

Corrosion-resistant equipment joints selected against the complete process environment.

Wind turbines and solar panels at a renewable energy site

Power & Energy

Lightweight engineered assemblies requiring controlled dimensions and traceability.

Marine & Shipbuilding

Corrosion-resistant joints subject to galvanic, preload and service-condition review.

FAQ

What information is required to quote Grade 2 Titanium Stud Bolts and Threaded Rods?

Provide the titanium grade, product form, dimensional standard or drawing, thread or critical dimensions, quantity, surface treatment, mating parts, service conditions and required inspection documents.

Which standards apply to Grade 2 Titanium Stud Bolts and Threaded Rods?

ASTM F468/F468M may apply when expressly specified; ASME B18, DIN and project references may control dimensions. Grade 2 material condition and finished-fastener acceptance remain separately controlled.

How are Grade 2 Titanium Stud Bolts and Threaded Rods inspected?

Available controls include MTC review, length and thread measurement, GO/NO-GO gauging, straightness, visual examination, specified tests and heat/lot traceability.

Grade 2 Titanium Stud Bolts and Threaded Rods